These are the RF pool service Default Values that are loaded when you start the public RF pool calculator.
You are able to change these values in the calculator to meet your requirements.
Number of Layers | 2 |
Quantity | 5 |
Delivery Term | 5 days |
PCB Dimension | 100 x 80 mm |
Single Board/ Panel | Single PCB |
Base Material | I-TERA – Tg 215°C |
Base Material Thickness | 0.50 mm |
Base Copper Foil – Outer Layers | 18µm/½oz |
Base Copper Foil – Inner Layers | 35µm/1oz |
Surface Finish | Chemical Ni/Au selective (ENIG) |
Soldermask Type/Colour | DI – Green |
Extra Options | None |
Legend Colour | Top – White Bottom – None |
Track Width/Spacing | 0.150mm |
Finished Hole Size | 0.250mm |
Outer Layer Annular Ring (OAR) | 0.125 mm |
Inner Layer Annular Ring (IAR) | 0.125 mm |
Minimum Copper to Board-edge Clearance – Outer Layers | 0.250mm (routed) |
Minimum Copper to Board-edge Clearance – Inner Layers | 0.400mm (routed) |
Slots and Cut-outs | 2.0mm tool |
Delivery Panels | 2.0mm break-routed |
Multilayer Build | Standard |
Electrical Test | Standard for double sided and higher layer counts |
UL Marking | not selected |
Stencil Material | 130µm stainless steel |
Stencil Size | PCB panel dimensions + 20 mm on each side |